| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Usage: | Textile Fabric Testing, Appearance Quality Testing |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Brittleness Temperature Tester is to determine the brittleness characteristic during low temperature testing for wire jacket and vulcanized rubber. Sample is impacted by impact head at a linear speed of 2±0.2m/s after sample fixed onto the test device is soaked into a medium at low temperature for 5 minutes. And then check whether the sample appears cracks, crevices, small holes and fragments at the lowest temperature
Test Principle
Adopts two-segment compressor to reduce temperature rapidly, the lowest temperature is up to -70ºC (You may add liquid nitrogen to the heat exchanger if you want to test at a temperature lower than -70°C. The lowest temperature is up to -120°C.). The temperature is highly controllable. The liquid heat transfer medium in the low temperature tank can be stirred by the stirring motor so as to obtain a better uniform temperature. 4 units of samples are able to be tested. Automatic rotary locating fixtures impact each group of samples and check the lowest temperature when brittle failure occurs.
Standard
| ASTM-D746 :2004-A, ASTM-D746 :2004-B, BS 903 A25:1992, GB/T15256-94, GB/T5470-2008(B Type), ISO 812-91, ISO 974:2000, JIS C3005-2000, JIS K 6723-1995, JIS K7216-1980 A Type, JIS K7216-1980(B Type), ASTM D2137-05 |
| Model | HP01 |
| Temp. Range | Room temp ~ -70.0ºC(-70 ~-120 liquid nitrogen) |
| Temp. Resolution | ±0.1ºC |
| Input Signal | Pt100 |
| Temp. Control | Temperature controlled, SSR and electric heater |
| Temp. Control | Compressor or liquid nitrogen |
| Striking Iinear Speed | 2 .0 ± 0.2 m/s |
| Size of Specimen | Type1: 25~40mm (L) × 6±1mm (W) × 2.0±0.2mm (T) Type2: 31.35±0.1mm (L) × 2.5±0.1mm (W) [6.35±0.1mm (head width), 6.35±0.1mm long] × 2.0±0.2mm (T) |
| Pilot Chute Size (W×D×H) | 18×57×15 cm |
| Dimension (W×D×H) | 73×85×145 cm |
| Weight (approx.) | 330kg |
| Power | 3∮, AC380V , 50/60Hz , 10A (Specified by user) |
Q: How is your service?
Q: Are you able to provide a ISO 17025 calibration certificate?
A: Yes, we generally provide two calibration certificates(optional).
• ISO 17025 certificate provided by a third party inspection company with charges.
• Calibration certificate provided by UTS without charges.
Q: Can you send report of fumigation report?
A: Our packing is composite board, not log, so it do not need fumigation treatment.
Thank You For Always Supporting UTS Products!
){kind=link}