Secured Trading Service

Laboratory Cone Calorimeter for Building Materials Test Equipment

Uts International Co., Ltd
  • Audited Supplier
  • 3 yrs

Contact Supplier

Product Highlights

  • Comprehensive Standards Compliance: Meets FAR 25.853, ISO 5660-1&2, ASTM E1354, ASTM E1474, ASTM E1740, ASTM F1550, ASTM D5485, ASTM D6113, CAN ULC 135, BS 476 Part 15.
  • High Precision Temperature Control: Cone heating temperature deviation within 2 degrees, max temperature 1100 degrees, radiation up to 120KW.
  • Advanced Gas Analysis System: Includes Servomex imported oxygen, CO, and CO2 analyzers with response times under 8 seconds and high accuracy.
  • Patented Cold Trap Technology: Self-developed patented cold trap with temperature control from 0 to 5 degrees for effective sampling.
  • High Accuracy Weighing Sensor: HBM imported load sensor with 0.01g resolution, 0.1g accuracy, and drift less than 0.1g within 30 minutes.
  • Adjustable Exhaust System: 1.5kw high-temperature resistance fan with frequency conversion speed control, flow adjustable from 0-50g/s.
  • CE and ISO 17025 Certification: Product certified with CE and optional ISO 17025 calibration certificates available from third parties or UTS.
  • Real-time Data Acquisition: 19-inch standard instrument rack with direct digital signal transmission to computer software for real-time analysis.

Shipping

Shipping Cost:
Contact the supplier about freight and estimated delivery time.

Online Trading Protection

Payment Guarantee
T/T PayPal ApplePay GooglePay visa mastercard american express discover JCB diners club PIX SPEI OXXO PSE OZOW Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Clearer shipment tracking with platform-supported logistics.
Inspection Service
Optional pre-shipment inspection for quality and quantity checks.
After-Sales & Dispute Handling
Platform-assisted dispute resolution, including refunds or returns when applicable.

Only orders placed and paid through Made-in-China.com Secured Trading are eligible for payment protection and the corresponding platform services.

Product Images of Laboratory Cone Calorimeter for Building Materials Test Equipment

Laboratory Cone Calorimeter for Building Materials Test Equipment pictures & photos
Laboratory Cone Calorimeter for Building Materials Test Equipment
Laboratory Cone Calorimeter for Building Materials Test Equipment pictures & photos
Laboratory Cone Calorimeter for Building Materials Test Equipment
Laboratory Cone Calorimeter for Building Materials Test Equipment pictures & photos
Laboratory Cone Calorimeter for Building Materials Test Equipment
Laboratory Cone Calorimeter for Building Materials Test Equipment pictures & photos
Laboratory Cone Calorimeter for Building Materials Test Equipment
Laboratory Cone Calorimeter for Building Materials Test Equipment pictures & photos
Laboratory Cone Calorimeter for Building Materials Test Equipment
Laboratory Cone Calorimeter for Building Materials Test Equipment pictures & photos
Laboratory Cone Calorimeter for Building Materials Test Equipment
  • Laboratory Cone Calorimeter for Building Materials Test Equipment
    Laboratory Cone Calorimeter for Building Materials Test Equipment
  • Laboratory Cone Calorimeter for Building Materials Test Equipment
    Laboratory Cone Calorimeter for Building Materials Test Equipment
  • Laboratory Cone Calorimeter for Building Materials Test Equipment
    Laboratory Cone Calorimeter for Building Materials Test Equipment
  • Laboratory Cone Calorimeter for Building Materials Test Equipment
    Laboratory Cone Calorimeter for Building Materials Test Equipment
  • Laboratory Cone Calorimeter for Building Materials Test Equipment
    Laboratory Cone Calorimeter for Building Materials Test Equipment
  • Laboratory Cone Calorimeter for Building Materials Test Equipment
    Laboratory Cone Calorimeter for Building Materials Test Equipment

Find Similar Products

Product Description

Product Description

Cone calorimeter is the most ideal test instrument to characterize the burning performance of materials, its test environment is close to the real burning environment of fire materials, and the test data obtained can evaluate the burning behavior of materials in fire.

Standards

FAR 25.853, ISO 5660-1&2, ASTM E1354, ASTM E1474, ASTME1740, ASTM F1550, ASTM D5485, ASTM D6113, CAN ULC 135, BS 476 Part 15
Features
1.The 19 inch standard instrument rack is used for data acquisition and analysis
2.Can be late with other thermal release measuring instruments common gas analysis equipment, such as SBI, solid room combustion
Product Parameters
 5.1 Conical heating components:
  1. Conical rated power 5000 w heater, heat lose heat 0 ~ 100 kw/m2, center of radiation intensity of illumination and sample 50 mm * 50 mm range, the deviation is less than 2%, through special temperature controller to control the temperature during test, the cone control heating temperature within 2 degrees deviation, can effectively control the samples of test heat release worth cone change of thermal radiation.
  2. The diameter of cone heating wire is 8mm, adopting imported high-temperature heating wire, the maximum temperature can be heated to 1100 degrees, and the maximum radiation value can be up to 120KW.
  3. Cone shell is a professional mold integrated molding, the interior filled with heat-resistant insulation materials, can effectively control the heat radiation of cone high temperature products

5.2. Temperature control components:
  1. Cone heating temperature controller adopts special high-temperature control type special temperature controller, SSR solid control circuit, accurately controls temperature fluctuation, temperature signal output module is directly connected with data collector, and the temperature data is transmitted to computer software in real time
  2. All temperature thermocouples adopt American omega type K thermocouples with high temperature resistance, which can be used for a long time under the high temperature of 1200 degrees
  3. Thermocouple diameter 1.5mm, measuring range up to 1300 degrees
  4. Thermocouple accuracy 0.1c

5.3. Weighing load
  1. HBM import load sensor
  2. Weight range: 0-3000g measurement accuracy: 0.1g
  3. Resolution: 0.01g drift within 30min is less than 0.1g, and response time within 10%-90% of the weighing range is less than 0.1s
  4. Instrument cabinet isolation independent design, to avoid other vibration impact on weighing measurement
  5. The data is transmitted through digital signal and connected directly to computer

5.4. Exhaust system
  1. The exhaust fan is 1.5kw high-temperature resistance fan, equipped with a frequency conversion speed control controller. The exhaust flow can be adjusted freely from 0-50g/s, and the flow accuracy is 0.1g/s
  2. Including: axial flow fan, 304 stainless steel exhaust pipe, diffusion plate, hood, gas sampling probe, differential pressure measurement probe, temperature measurement sensor, (imported thermocouple and imported differential pressure sensor) exhaust pipe, orifice flow meter and other components.

5.5. Gas sampling system
  1. It includes annular sampler, particle filter, refrigerated well, air pump, water drying column, CO2 filter column and flow controller
  2. Diaphragm pump: flow 33L/min

5.6 cold trap:
  1. Self-developed and patented cold trap with temperature control of 0-5 degrees and equipped with inlet diaphragm sampling pump annular sampler shall be installed in the air inlet pipe 685 mm away from the hood of the set. There shall be 12 holes on the sampler to equalize air flow components.

5.7. Imported micro pressure differential sensor
  1. The pressure difference between the two sides of the orifice plate at 350 mm above the fan was measured by the us SETRA pressure differential sensor, and the inner diameter of the orifice plate was 57mm + / - 1mm
  2. Precision of the inlet differential pressure sensor was + / -1% FS, hysteresis + / -0.1% FS, and maximum linear pressure was 69Kpa
  3. The temperature of the air flow is measured by the American OMEGA armored thermocouple with a diameter of 1.5mm closed joint. The thermocouple should be installed 100 mm above the orifice plate

5.8. Oxygen analyzer, carbon monoxide analyzer and carbon dioxide analyzer (in full compliance with the technical requirements of 1.2.3 1.2.4 2.2.4 in the supply requirements in chapter 5 of the bidding document)
  1. Servomex imported type 4100 special gas for combustion test
  2. Oxygen: 0-25%, analyzer 10%~90%, response time less than 7s, co 0-1% analyzer 10%~90%, response time less than 8s, co2 0-10% analyzer 10%~90%, response time less than 7s, inherent error <0.02%, repeatability <0.01%
More Products
Laboratory Cone Calorimeter for Building Materials Test Equipment
Company Profile

Laboratory Cone Calorimeter for Building Materials Test Equipment

Our Exhibition

Laboratory Cone Calorimeter for Building Materials Test EquipmentLaboratory Cone Calorimeter for Building Materials Test Equipment

Our Customers

Laboratory Cone Calorimeter for Building Materials Test Equipment

Our Advantages

Laboratory Cone Calorimeter for Building Materials Test Equipment
Laboratory Cone Calorimeter for Building Materials Test Equipment

FAQ

Q: How is your service?

  - All of test devices will be calibrated and debugged before delivery to guaranty the quality.
  - Our professional after-sale team will help you solving any problem within 24 hours* 7 days by emails or videos 
  - English operation manual and operation video will guide you how to use it.
  - On-site machine training & installation can be provided with certain charges.

Q: What's your warranty period?
A.12 months. In case of product problems, we provide needed spares parts for free during the warranty (exclude consumables and man-made damages)

Q: What's the payment term?
A: Usually TT, L/C are available. For others, please contact with us for negotiation.

Q: What's your lead time?
A.We have professional production line and stuff whom can make a nice quality in a short time. Usually, within 5-25 days is ok, which is based on the stock status.


Q: Are you able to provide a ISO 17025 calibration certificate?
A: Yes, we generally provide two calibration certificates(optional).
• ISO 17025 certificate provided by a third party inspection company with charges.
• Calibration certificate provided by UTS without charges.

Q: Can you send report of fumigation report?
A: Our packing is composite board, not log, so it do not need fumigation treatment.


            Thank You For Always Supporting UTS Products!

About the Supplier

This supplier has been audited by TÜV Rheinland. Verify the report on the official TÜV Rheinland website with ID "MIC-ASI247136". Items marked "verified" are certified.

Watch Video
Watch Video
Uts International Co., Ltd
Uts International Co., Ltd
Uts International Co., Ltd
Uts International Co., Ltd
Uts International Co., Ltd
Uts International Co., Ltd
Uts International Co., Ltd
Uts International Co., Ltd

About Our Factory & Business Background

Address
No. 1 Zhencheng Lane, Xiangcheng District, Zhangzhou, Fujian, China
Terms of Payment
LC, T/T, D/P, Western Union
International Commercial Terms(Incoterms)
FOB, EXW, CFR, CIF, DDP, DAP, CIP, CPT, FCA
Average Lead Time
Peak Season Lead Time: one month
Off Season Lead Time: within 15 workdays
Nearest Port
XIAMEN, SHANGHAI, SHENZHEN

Our Production Capability & Technical Expertise

Main Products
Textile Test Equipment, Footwear Test Equipment, Environmental Test Chamber, Toys Test Instrument, Polymer Test Equipment, Yarn Testing Machine, Fiber Testing Machine, Nonwoven Testing Machines, Carpet Testing Equipment, Feather and Down Testing Machine

Our Industry Experience & Global Business Record

Export Year
2016-08-05
Main Markets
North America, South America, Eastern Europe, Southeast Asia, Mid East, Western Europe

FAQ

How is your service?
All of test devices will be calibrated and debugged before delivery to guaranty the quality. Our professional after-sale team will help you solving any problem within 24 hours* 7 days by emails or videos. English operation manual and operation video will guide you how to use it. On-site machine training & installation can be provided with certain charges.
What's your warranty period?
12 months. In case of product problems, we provide needed spares parts for free during the warranty (exclude consumables and man-made damages)
What's the payment term?
Usually TT, L/C are available. For others, please contact with us for negotiation.
What's your lead time?
We have professional production line and stuff whom can make a nice quality in a short time. Usually, within 5-25 days is ok, which is based on the stock status.
Are you able to provide a ISO 17025 calibration certificate?
Yes, we generally provide two calibration certificates(optional). ISO 17025 certificate provided by a third party inspection company with charges. Calibration certificate provided by UTS without charges.
Can you send report of fumigation report?
Our packing is composite board, not log, so it do not need fumigation treatment.

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now