| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Usage: | Textile Fabric Testing, Appearance Quality Testing, Benchtop Spectrophotometer |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Design of dual optical path based on differential spectroscopy engine and 1nm grating
Automatic calibration technology to ensure long-term consistency of fluorescence measurements
Ultra-high accuracy and excellent inter-Instrument agreement guaranteed
Technical characteristics
Repeatability 0.01,Inter-Instrument Agreement 0.15
| Model | D36DS |
| Lighting/measuring conditions | Reflection: d/8 (diffuse illumination, 8° direction reception) |
| SCI(Contains specular reflected light)/ SCE(not contain specular reflected light)measure at same time. Compliance standards: CIE No.15, GB/T 3978, GB 2893, GB/T 18833, ISO7724/1, DIN5033 Teil7, JIS Z8722 Condition C, ASTM E1164, ASTM-D1003-07 | |
| Transmission: d/0 (diffuse illumination, vertical reception) | |
| Sensor | Differential spectrum engine |
| Spectroscopic method | Concave grating |
| Integrating sphere diameter | 152mm |
| Wavelength range | 360nm-780nm |
| Wavelength interval | 10nm |
| Half-wave width | 1.6nm |
| Reflectance measurement range | 0-200%,resolution0.01% |
| Lighting source | Pulsed xenon lamps and LED |
| Ultraviolet measurement | Includes UV, 400nm cutoff, 420nm cutoff, 460nm cutoff |
| Measuring time | Single mode <2s |
| Lighting/measuring calibers | Reflection: XLAV Φ25.4mm/Φ30mm;LAVΦ15mm/Φ18mm;MAVΦ8mm/Φ11mm;SAVΦ3mm/Φ6mm Users can customize the calibre, and the calibre switch is automatically recognized Transmission:Φ17mm/Φ25mm |
| Transmission measurement specification | Sample height and thickness: height is not limited, thickness ≤50mm |
| Long-term repeatability | XLAV chroma value: standard deviation ΔE*ab within 0.1 (0ºC-40ºC arbitrary temperature change) XLAV chroma value: standard deviation ΔE*ab 0.01 or less (under constant temperature conditions, the white correction plate is measured every hour within 24 hours) |
| Repeatability * | ΔE*ab≤0.01, Spectral reflection/transmittance ≤0.1% |
| Inter-Instrument Agreement** | XLAV ΔE*ab 0.15 |
| Standard observer | 2° and 10° |
| Viewing light source | A,B,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,U30,U35,DLF,NBF,TL83,TL84,ID50,ID65,LED-B1,LED-B2,LED-B3,LED-B4,LED-B5,LED-BH1,LED-RGB1,LED-V1,LED-V2 |
| Language | Simplified Chinese, English, Traditional Chinese, Russian, Spanish, Portuguese, Japanese, Thai, Korean, German, French, Polish |
| Display content | Spectral data, Spectrogram, chromaticity data, chromaticity Data, chromaticity map, Pass/Fail judgment, Simulation color, Color evaluation, fog, liquid chromaticity, Color bias |
| Color space | CIE LAB,CIE LUV,LCh,Hunter Lab,Yxy,XYZ,Musell,s-RGB,βxy |
| Chroma index | WI(ASTM E313-20,ASTM E313-73,CIE,ISO2470/R457,AATCC,Hunter,Taube,Berger Stensby),YI(ASTM D1925,ASTM E313-20,ASTM E313-73),Tint(ASTM E313-20),Isochromatic index Milm, color fastness, color changing fastness,ISO brightness,R457,A density,T density,E density,M density,APHA/Hazen/Pt-Co(platinum-cobalt index),Gardner(Gardner Index),Saybolt(Seibert Index),Astm color, fog, total transmittance, covering power, force, intensity |
| Color difference formula | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc,ΔE*94,ΔE*00,ΔEab(Hunter),555 color tone classification |
| Storage | 8GB |
| Screen size | 7-inch capacitive touch screen |
| Audit Trail | Yes (according to FDA and CFDA requirements) |
| Operating system | Android |
| Power source | Dc regulated power supply |
| Operating temperature and humidity | 5 ~ 40°C, relative humidity 80%(35°C) below no condensation |
| Storage temperature and humidity | -20 ~ 45°C, relative humidity 80%(35°C) below no condensation |
| Accessories | Power adapter, USB cable, transmission fixture, software U disk, black cavity, white board, green board,30mm aperture, 18mm aperture ,11mm aperture, 6mm aperture, support table,cuvette, |
| Optional accessories | Heating transmission jig (including control circuit), vertical bracket, pneumatic jacking rod (including control circuit), small sample holding accessories, reflection cupping plate (non-removable), fiber test box, film jig, micro transmission jig, rod box, European standard plug, American standard plug |
| Port | RS-232,USB,USB-B,Bluetooth |
| Camera positioning | Ultra HD camera(1400dpi) |
| Automatic calibration | √(Can greatly improve the long-term repeatability of the instrument) |
| Fluorescence calibration | √(Can automatically adjust the UV intensity, and ensure that the value of the instrument is highly consistent with that of other imported instruments when measuring materials containing fluorescence) |
| Brightness calibration | √(Through the brightness calibration algorithm, the real color of ultra-dark samples is restored) |
| Others | The instrument can be measured sideways, up and down (using accessories); Automatic temperature and humidity compensation function; PC side software save sample image function |
Q: How is your service?
Q: Are you able to provide a ISO 17025 calibration certificate?
A: Yes, we generally provide two calibration certificates(optional).
• ISO 17025 certificate provided by a third party inspection company with charges.
• Calibration certificate provided by UTS without charges.
Q: Can you send report of fumigation report?
A: Our packing is composite board, not log, so it do not need fumigation treatment.
Thank You For Always Supporting UTS Products!
){kind=link}