Product Description
Most of the polymer materials in the outdoor due to moisture (especially condensation) causes corrosion more than other factors, so the coating moisture resistance test is also an important method to assess its corrosion resistance test, the method can be used as an important means of assessment to examine the coating in the resistance to corrosion.
Standard
Features
Continuous condensation test chamber
The E009N Continuous Condensation Test Chamber is designed in accordance with the requirements of GB/T 13893-2008 "Determination of Humidity Resistance of Colour Paint and Varnish Continuous Condensation Method" (Equivalent to ISO 6270 Standard Part 1) and ASTM D 4585 for assessing the humidity resistance of coatings, paint systems and their analogues to high humidity environments with continuous condensation. The test method specifies a continuous condensation performance test that may occur on the surface of a coating under severe exposure conditions. It is applicable to coating systems including porous substrates (e.g., wood, gypsum, and paper-faced gypsum boards) and non-porous substrates (e.g., metals), and reveals phenomena such as damage to the coating (including bubbling, staining, softening, wrinkling, and embrittlement) as well as damage to the substrate.
The instrument uses 100% condensing humidity to simulate and accelerate damage to metals, coatings and organic materials caused by dew. Increasing condensate temperatures will damage dew more quickly than natural storms. It has a simple structure, easy operation and high reproducibility of test results.
Temperature and Moisture In the E009N Continuous Condensation Tester, moisture can be either invisible dew or continuously flowing hot condensate. The E009N Continuous Condensation Tester can be set up with a drying cycle to remove osmotic pressure, or moisture erosion can be accelerated by increasing the condensation temperature.
The E009N Continuous Condensation Tester is fairly inexpensive to purchase and operate, it requires no special installation conditions, just a connection to an ordinary power supply and mains water for normal use. Its versatility, speed and low operating costs make the E009N Continuous Condensation Tester a very cost-effective condensation tester on the market.
1.Three working conditions of the test chamber can be controlled through programming: humidification, natural cooling, drying and the corresponding temperature and running time of each working condition, and set the total running time and the number of cycles of the programme.
2.Automatic water replenishment device
3.Water temperature upper limit protection device
Control system
1.the use of colour 7-inch touch screen control condensation and drying test parameters temperature setting (SV) actual (PV) value directly display can be displayed to show the implementation of the program number, section times, the remaining time and the number of cycles, running time display
Program editing and graphic curve display, Execution programme curve display.
Individual programme editing screen with 4 segment temperatures and times per page.
Fixed point or programme operation status display
Backlight adjustable, backlight time can be set.
Display protection function can be timed or manually switched off.
Language conversion can be switched between Chinese and English
2.Program capacity
Usable programme volume: Max. 120 groups
A programme can be combined from 1 to 99 segments.
Usable memory capacity: 1400 segments
Repeatable commands: up to 999 times for each command.
Programs can be linked together
Three sets of time signals from TS1 to TS3.
Program time can be set from 1 minute to 999 hours per segment.
3.Control function
Editing, clearing, inserting and so on.
With 2 groups of time signal output control (can control the ON/OFF action of the object to be measured).
9 groups of PID parameter settings
With skip and hold function during programme execution.
Power failure programme memory, automatically start and continue to execute the programme after power restoration.
Program editing functions such as copying, copying, linking, and editing the title of the experiment.
Data acquisition, export, and graphic display functions.
PID automatic calculation and FUZZY control
Date and time adjustment function
4.Communication interface
Can display the curve, data acquisition
5.Storage function
Do not need to connect to the computer recorder, can directly record the test data, through the computer can print the test data and curves, easy to use.
6.standby function with standby power saving function, can standby to see the picture
7.Setting range is adjusted according to the temperature working range of the equipment (upper limit +5ºC, lower limit -5ºC)
8.Display resolution 0.01 ºC; time: 0.1min.
9.Input platinum resistance
10.Control mode
Anti-integral saturation PID
BTC balanced thermoregulation control mode (temperature test equipment)
BTHC balance temperature and humidity control mode (temperature and humidity test equipment)
11.Curve recording function with a battery-protected RAM, can save the device's set value, sampling value and sampling time of the moment; the maximum recording time of 60 days (when the sampling period of 1.5min) Troubleshooting prompts when the machine fails, the controller automatically detects the cause of the failure, and displays the fault picture and processing methods
12.Accessory functions (standard configuration)
Fault alarm and cause, processing tips function
Power failure protection function
Upper and lower limit temperature protection function
Calendar timing function
Appointment start function
Self-diagnosis function
Product Parameters
| Model |
E009N |
| Test plate and the horizontal plane angle |
(60 ± 5)° |
| Sample capacity |
40 pieces (150mm × 100mm/150mm × 75mm/150mm × 70mm standard test plate, note that the maximum width of 100mm) |
| Temperature range of the working chamber |
room temperature ~ 60 |
| Overall dimensions |
1350mm × 500mm × 1100mm (L × W × H) |
| Weight |
130KG |
| Power supply |
220V 50HZ; the maximum power of the machine 2.0KW |
More Products
Company Profile
Our Exhibition
Our Customers
Our Advantages
FAQ
Q: How is your service?
- All of test devices will be calibrated and debugged before delivery to guaranty the quality.
- Our professional after-sale team will help you solving any problem within 24 hours* 7 days by emails or videos
- English operation manual and operation video will guide you how to use it.
- On-site machine training & installation can be provided with certain charges.
Q: What's your warranty period?
A.12 months. In case of product problems, we provide needed spares parts for free during the warranty (exclude consumables and man-made damages)
Q: What's the payment term?
A: Usually TT, L/C are available. For others, please contact with us for negotiation.
Q: What's your lead time?
A.We have professional production line and stuff whom can make a nice quality in a short time. Usually, within 5-25 days is ok, which is based on the stock status.
Q: Are you able to provide a ISO 17025 calibration certificate?
A: Yes, we generally provide two calibration certificates(optional).
• ISO 17025 certificate provided by a third party inspection company with charges.
• Calibration certificate provided by UTS without charges.
Q: Can you send report of fumigation report?
A: Our packing is composite board, not log, so it do not need fumigation treatment.
Thank You For Always Supporting UTS Products!
Audited Supplier 
){kind=link}
){kind=link}