Product Description
Shoelace Abrasion Tester , to determine the abrasion resistance for all shoelaces and eyelets. It is commonly application for footwear quality control.
Standard
Work Principle
The method uses a standard eyelet, which is placed on a rigid plate, and then tested on the shoelaces. Shoelaces should be kept in a standard controlled environment for at least 48 hours before testing.
The device consists of six shoelace test points. The shoe eyelets are attached to the rigid plate and is then clamped into the provided fixture. The shoelace was tested by clamping one end of the shoe into a vehicle and passing the other end through the eye of the shoe, which was then attached to a heavy object that could pull the shoe 4.46 N.
The machine passes each shoelace through the eyelets at a distance of 75mm at a frequency of 100 cycles per minute. The movement of the carrier causes the shoelace to rub in the eyelets. Each point is equipped with a separate counter. When the shoelace breaks, the counter of the corresponding point stops counting. The machine stopped running when all six shoelaces broke.
Features
1.Equipped with manual control device, which is very easy to set up, and its protective performance fully meets European health and safety requirements.
2.The machine supports the use of standard shoelaces to test shoelaces, or standard shoelaces to test shoelaces.
3.Six sets of specimens can be tested once.
4.Equipped with a separate counter for each working positions.
Product Parameters
Model |
H048 |
Load(weight) |
455g±5g x6pcs |
Counter |
LCD, 0~999,999 |
Standard eyelet |
(1)Brass, Inner diameter: 4.5mm (2)Fiberboard Inner diameter: 5.0±0.2mm |
Stroke |
76 ±2 mm |
Test Speed |
100±5cpm |
Dimension(W×D×H) |
55× 58×41 cm |
Weight(approx.) |
60 kg |
More Products
Company Profile
Our Exhibition
Our Customers
Our Advantages
FAQ
Q: How is your service?
- All of test devices will be calibrated and debugged before delivery to guaranty the quality.
- Our professional after-sale team will help you solving any problem within 24 hours* 7 days by emails or videos
- English operation manual and operation video will guide you how to use it.
- On-site machine training & installation can be provided with certain charges.
Q: What's your warranty period?
A.12 months. In case of product problems, we provide needed spares parts for free during the warranty (exclude consumables and man-made damages)
Q: What's the payment term?
A: Usually TT, L/C are available. For others, please contact with us for negotiation.
Q: What's your lead time?
A.We have professional production line and stuff whom can make a nice quality in a short time. Usually, within 5-25 days is ok, which is based on the stock status.
Q: Are you able to provide a ISO 17025 calibration certificate?
A: Yes, we generally provide two calibration certificates(optional).
• ISO 17025 certificate provided by a third party inspection company with charges.
• Calibration certificate provided by UTS without charges.
Q: Can you send report of fumigation report?
A: Our packing is composite board, not log, so it do not need fumigation treatment.
Thank You For Always Supporting UTS Products!